Thursday, October 11, 2007

Nokia Secret Codes

source : http://nokiatone.ifrance.com/nokiatone/secrets.htm
I think it's worth to try

To check the IMEI (International Mobile Equipment Identity) Type-

*#06#

Information you get from the IMEI-

XXXXXX XX XXXXXX X

TAC FAC SNR SP

  • TAC = Type approval code

  • FAC = Final assembly code

  • SNR = Serial number

  • SP = Spare

To check the phones Software revision type-

*#0000#

Information you get from the Software revision-

V 05.31

18-02-99

NSE-3

  • 1ST Line = Software revision

  • 2ND Line = The date of the software release

  • 3RD Line = Phone type

To enter the service menu type-

*#92702689# (*#WAR0ANTY#)

  • Serial number (IMEI)

  • Production date (MM/YY)

  • Purchase date (MM/YY) You can only enter the date once.

  • Date of last repair (0000=No repair)

  • Transfer user data to another Nokia phone via Infra-Red

Clock Stopping

To check weather your SIM Card supports clock stopping type-

*#746025625# (*#SIM0CLOCK#)

Revealing the Headphone and Car-Kit menus

Please note that if you do these next tricks, the new menus can't be erased without retoring the factory default settings. To do these tricks you need to short-circuit the pins on the bottom of the phone next to where you plug in you charger.

1. To activate the "Headset" menu, you need to short-circuit pins "3" and "4". After a short time the word "Headset" will be shown in the display. Menu 3-6 is now enabled.

2. To activate the "Car" menu, you need to short-circuit pins "4" and "5". After a short time the word "Car" will be shown in the display. Menu 3-7 is now enabled.

THE REBOOT TRICK

This should work on all software versions of the 6110.

1. Go to the Calendar (Menu-8)

2. Make a note or reminder.

3. Enter some text into the edit box.

4. Hold "Clear" until the whole text is cleared, then press "Back".

5. Press "0". The main screen will now be showing but a space appears on the screen. (you can't see it)

6. Enter 4 digits (e.g. 1234).

7. Use the down arrow to move the cursor to the left side of the numbers and the space (Down arrow twice).

8. Now enter 6 digits and press the call button.

Wait for a few seconds, the screen should start to flash and reboots. It should alsowork on other menus like the "Profiles" menu.

EFR CALL QUALITY

To activate EFR (Enhanced Full Rate) Enter the code-

*3370#

This improves call quality but decreases batterylife by about 5%

To deactivate it, Enter the code-

#3370#

THE JAMES BOND TRICK

If you short-circuit theleft middle and right pins on the bottom of the phone with all connections touching each other, the Nokia software hangs! The profile "Headset" will be activated. Before you do this just activate the "Automatic Answer" in the headset profile and set the ringing volume to "Mute". Now you can use your phone for checking out what people are talking about in a room. Just place it under a table in a room and call it. The phone receives the call without ringing and you can listen to what people are saying.

NETWORK MONITOR

There is a hidden menu inside your Nokia phone. If you want to activate it, you'll have to re-program some chips inside of your phone.

  1. Check your software version. You can only continue if you have v4.33, v4.73 or v5.24.

  2. Take apart the phone.

  3. De-solder the EEPROM (ATMEL AT 24C64).

  4. Read out the data with an EEPROM programmer and save it to a file (Backup).

  5. If you have v.33 or v4.73, change the address "03B8" from "00" to "FF".

  6. If you have v5.24 then change the address "0378" from "00" to "FF".

  7. Write the new data to the EEPROM and solder it back to the phone,

  8. Power on your phone and you should have "Netmonitor" enabled.

The Network Monitor gives you the following information.

  • Carrier number

  • MS RX Level in DBM

  • Received signal quality

  • MS TX power level

  • C1 (Path loss criterion, used for cell selection and reselection). The range is -99 to 99.

  • RTL (Radio link timeout).

  • Timeslot

  • Indication of the transmitter status

  • Information on the Network parameters.

  • TMSI (Temporary Mobile Subscriber Identity).

  • Cell identification (Cell ID, Number of cells being used).

  • MCC (Mobile country code)

  • MCN (Mobile network code)

  • LAC (Location area code)

  • Ciphering (On/Off)

  • Hopping (On/Off)

  • DTX (On/Off)

  • Discard cell barred information

CHECK SIM-LOCK

Note - If you bought your Nokia on UK Vodafone or UK Cellnet you do not need to check this because they both transmit on GSM900, and they don't lock the phones. However if you bought your phone on UK Orange or UK One2one your phone may be blocked. The reason is that they both transmitt on GSM1800. To make a call on GSM1800 you need what is known as a "Dual band" phone. A dual band phone is able to transmit on both GSM900 and GSM180

1 comment:

Danang Cipto Wahyuhono said...

There's also here : http://www.ppdpetaling.net/modules.php?name=News&file=article&sid=84
Code


Description

*3370#




Activate Enhanced Full Rate Codec (EFR) - Your phone uses the best sound quality but talk time is reduced my approx. 5%


#3370#


Deactivate Enhanced Full Rate Codec (EFR)


*4720#


Activate Half Rate Codec - Your phone uses a lower quality sound but you should gain approx 30% more Talk Time.


#4720#


Deactivate Half Rate Codec.


*#0000#


Displays your phones software version, 1st Line : Software Version, 2nd Line : Software Release Date, 3rd Line : Compression Type.


*#9999#


Phones software version if *#0000# does not work.


*#06#


For checking the International Mobile Equipment Identity (IMEI Number).


#pw+1234567890+1#


Provider Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).


#pw+1234567890+2#


Network Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).


#pw+1234567890+3#


Country Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).


#pw+1234567890+4#


SIM Card Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).


*#147#


(vodafone) this lets you know who called you last.


*#1471#


Last call (Only vodofone).


*#21#


Allows you to check the number that "All Calls" are diverted to.


*#2640#


Displays security code in use.


*#30#


Lets you see the private number.


*#43#


Allows you to check the "Call Waiting" status of your phone.


*#61#


Allows you to check the number that "On No Reply" calls are diverted to.


*#62#


Allows you to check the number that "Divert If Unreachable (no service)" calls are diverted to.


*#67#


Allows you to check the number that "On Busy Calls" are diverted to.


*#67705646#


Removes operator logo on 3310 & 3330.


*#73#


Reset phone timers and game scores.


*#746025625#


Displays the SIM Clock status, if your phone supports this power saving feature "SIM Clock Stop Allowed", it means you will get the best standby time possible.


*#7760#


Manufactures code.


*#7780#


Restore factory settings.


*#8110#


Software version for the nokia 8110.


*#92702689#


Displays - 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair (0000 for no repairs), 5.Transfer User Data. To exit this mode you need to switch your phone off then on again.


*#94870345123456789#


Deactivate the PWM-Mem.


**21*number#


Turn on "All Calls" diverting to the phone number entered.


**61*number#


Turn on "No Reply" diverting to the phone number entered.


**67*number#


Turn on "On Busy" diverting to the phone number entered.


12345


This is the default security code.


press and hold #


Lets you switch between lines.

"